Recent content by Jim_Wilson

  1. J

    RCD Board

    The shed is 6m away. The reason I was asking is if the CU has an RCD, do I also need to fit an RCD socket in the shed ? Tonyelectric, I do have a reasonably knowledge, I just did not express myself fully on the other post.
  2. J

    Cleat size for SWA

    I did not express myself properly and you guys are quick to criticise I'm not going to ire the SWA directly into a plug - I'm not THAT stupid ! I will gland it into a IP rated JB outside and then go through the wall (protecting the cable of course) with flex to terminate on a plug The...
  3. J

    RCD Board

    How can I tell if I have an RCD board ? I have a Crabtree with 6 x MCB (SB6000) and a main switch witch has test button and quotes "100ma trip"
  4. J

    Cleat size for SWA

    I am running some SWA 6943X 3 core 2.5mmsq up to my shed. What size cleats do I need. I cant find any size guide that relates size x to cable diameter Also, while I am here, is it better to put an RCD socket in the shed or an RCD adapter in the house where the SWA will be plugged in (I...
  5. J

    Preperation for rendering

    OK. Everybody is looking, but no body is replying ! Please can abone tell me if the above is correct or if not what I should do ! Thanks
  6. J

    Preperation for rendering

    I am looking to render the panels on my house that are between the upstairs and downstairs windows (approx 2m x 2m). I'n not sure what I need to do to prepare for the render. At the moment there is softwood cladding fixed to the timber joists/beams. This is my thinking and please correct...
Back
Top