Recent content by jimbob100_99

Hi depending on your set up there you should get both boards on E7 Meter during the night. I would advise you you changing your Immersion Switch to an Economy 7 Immersion switch, this basically turns your immersion on overnight on the E7 Rate but allows you to boost the Immersion during the day...

Request an Earth Terminal from your local supplier they will tell you if you can have TNCS supply or if indeed there is one already there for you... If not RCDS all the way on TT

Why do we bother getting qualified when you have people who have not got a clue bodging things in there houses...... It`s about time only qualified people can buy electrical accessories so we can get away from these DIY Bodgers...... Hope your house insurance covers your DIY electrical Works ...

I would be inclined to run a new 2.5mmT+E circuit in for your immersion with a 20A dp switch. Its good practice not to power boiler and Immersion from same circuit just in case that circuit ever fails you will loose both means of heating your water. Also i would put a switched fused spur in for...

They are full Calibration check meters

They are full Calibration check meters

Alot of people are making these now..If your NICEIC look in there free newsletter they are in there for around £100 ....Also elec wholesalers sale them......Hope this helps

If you only have one red(com) and one black(L1) wire at your existing porch switch you will not be able to power your new light by connecting your new light cable to that switch.This is because you have no Neutral at that switch....... You will have to get a neutral to the switch or to your new...

Above 2MOhm your ok Above 100MOhm your in heaven!!!! :)

Always a Stigma around RCD and showers, But as post above if you cant beat em join em.... The price of 1way RCD Unit is now so cheap you may as well install one....

2x2.5 down a 20mm conduit?????? What about leaving room in the conduit!!!! Use PVC SINGLES.....