Recent content by Jimmy3645

I’ve finally got to the bottom of this thanks for everyone that replied… basically the two manifolds as you look at the downstairs setup. The bottom manifold (return) has hand knobs to adjust the flow.. all of these were fully open so I’ve been thinking that was that… but the top manifold...

In fairness, I’ve just fitted this radiator just before we started using the central heating for the winter so I haven’t actually checked it recently but it has always worked yes and all the other radiators are working fine in the house I’ve definitely come off the feed and return. I have...

Got it thanks very much….. I only drained this circuit… I will drain it and set up a hose from the top drain plug outside or something

I will absolutely do this thanks…. but cant see how it will fix my problem, Neither radiators are working even with both TRVs fully open and both lockshields open, even with all other radiators shut off at the manifold.

This is how it was, and how it is now. I haven’t Tee’d into the old feed because I wanted to give the new radiator priority.

Lockshields open yes

Thanks very much…. Yes the new radiator seems to be full of water. It appears to be all bled up ive had the bleed screws off completely etc The feed pipe is hot straight away and the TRV gets very hot but thats the end of it. ( I have removed the TRV and replaced it with a straight piece of...

Recently had a small extension fitted to our house and I’ve fitted a new radiator in the room. Our central heating system is pretty modern with a distributor upstairs and one downside, each radiator is fed individually by 16mm underfloor heating pipes. There's a radiator in the room against...