jj4091's latest activity
-
Jjj4091 replied to the thread Alternator Repair.I don't think it is just the rating of the iron but also the size of the tip and the thing that you are trying to solder. If it applies...
-
Jjj4091 replied to the thread How to seal around washing machine pipe?.Something like this should make it easier for you...
-
Jjj4091 replied to the thread Drainpipes spill water onto patio.To me it looks like you need to remove the grid and clean out the gully, fit a 135degree bend to the kitchen waste and take it below the...
-
Jjj4091 replied to the thread Cooker Hood assembly.https://www.diynot.com/diy/threads/cooker-extractor-fan.575142/ The link no longer works for me, so you will probably have to contact...
-
Jjj4091 replied to the thread Drain cover handles.We had one in our imprinted concrete and tried everything, apart from one of those lift dollies (that I have never seen before). I ended...
-
Jjj4091 replied to the thread Unknown pipe by front door.Looks like it's possibly some sort of test point, but in my opinion you need get your supplier to check if it is live or dead and cap it...
-
Jjj4091 replied to the thread Help I cannot work out the pipes under the sink.Look at the pic's here and lay your bits on the floor. out as best suits your set up...
-
Jjj4091 replied to the thread Feather edge clout.I was taught to hit the point of the nail to blunt it, with the head resting on somehiong hard,before hammering into thin wood to help...
-
Jjj4091 replied to the thread Unknown pipe by front door.Is it on your propery or does your front door open on to a public pavement
-
Jjj4091 replied to the thread Shower room basin possibilities.Most people would want a mirror over the washbasin which rules out under the window. You will need to give available dimensions to get...
-
Jjj4091 replied to the thread Door catching floor.Get some rising butt hinges
-
Jjj4091 replied to the thread Rattling garage pelmet.Stick some of this across the top to the soffit and down the sides of the pelmet to the frame...
-
Jjj4091 replied to the thread Hole for shower waste (help/advice).Does it flex when you stand on it. If not it should be ok. Epecially once the tray is installed.
-
Jjj4091 replied to the thread Drainage against house wall.When you dug out your trench was there any sign of a DPC ? Have you got cavity or solid walls ?
-
Jjj4091 replied to the thread New BEKO cooker connection..Please supply a pic of what you currently have showing the isolator and the cable sticking out of the wall. As blup says you need a...