Recent content by jlaspire

right kind of see what you mean. Good job I'm only putting the cables in place! Thanks for your help!

Thanks for the replies. Have checked and all the central heating is now in plastic just the last bit of the tail runs. If the lights and the shower go back to the main board on single runs as this was a new installation to the rest of the house with a separate board how come they still...

From what I can see they have used the shower supply earth as the main earth run this has then been taken to the lights and then down to the radiator. Think possibly the central heating may have been changed at a later date so the radiator would have been also bonded but has now been changed to...

Hello. Sorry yes all the electrical items in the bathroom are rcd protected. This is a council install before and a new rcd box is fitted separate to the rest of the house.

Thank you for the reply. Currently the only things that were bonded were the shower (from the pull cord fuse switch), lighting circuit and then down to the radiator. All together with no run back to the main board. I'm just doing a change over and adding a bath as it was a wet room before...

I'm about to board existing wiring runs and want to make sure everything is in place before it's all done. Electrics are from above so will all be covered over and wont be able to change them. The original earth bonding was taken from the shower fuse switch in the ceiling and then dropped...

Sorry was not having a go at you! Just annoying to see what they do. This is an easy fix which you should be able to do yourself. Plenty of videos on youtube on how to cut the flashing in!

I really like the Dulux Satinwood. Not long been using it but think its great for coverage and the final finish is great. Worrying to read this! What other comparable Satinwood do you use?

Seriously the people that did that repair called themselves Roofers??? Did they not advise you at the time that you needed flashing cutting in and this was the best solution or did you ask them just to patch it? I sometimes wounder how these so called trades men get away with this kind of...