Recent content by Joe Fixit

Thanks for all the help guys. Think this is gonna be the best (without breaking wall). Just triple checking that the stub of the Tee with the access plug is ok? Won't start collecting rubbish there right? (Circled in red)

Being stupid. Forgot to wrap the black rubber washer around pipe first

Might be a silly question but I just assumed you connect a 32mm pipe to this end of the p trap? But can't work out how to secure it? (It's a mcalpine asa10 1quarter inch)

Another option is this bizarre layout

Hi guys, if using a 90elbow at the top, I could make it work but would need to have a small stubby section of 32mm pipe. Is this ok? (Highlighted on red). It'll only be solvent on one so at least removing it from compression would be ok

Thanks for the help guys. Bought a load of different parts and just tried the T and sweeps. Don't think I can make it work (note in the photo, that's without any straight pipes joining the joints)

But the pipe coming out of the wall is horizontal? The dead end could collect if directly connected to it? Hence why I suggested it would be an elbow then the T?

Can't find any elbows with a cleaning eye. Guess I would need an elbow connected to the pipe in the wall, then a t above it. As putting a t directly onto the pipe in the wall seems like a potential of having stuff stuck at the cleaning eye end?

Will try and do that. Will try a swept at the bottom of I can

This one ok?

What sorcery is this?! Sounds like a useful to have round the house anyway

Ok, thanks. That sounds logical. What's meths? Like 99% isopropyl? Also turps?

Will have a look and start crossing my fingers Thanks for your help

@Scally-Ho it does mention it's anodised in the specification section. Any recommendations of paint stripper to use?

Its coated aluminium This one...