Recent content by joeybancroft

hi, cheers would the best thing to do now is leave the underfloor heating on low for the next few weeks say 20c to let the screed and blocks dry out?

hi, it was about a month after we laid the cement topping, we did have a dehumidifier on in the roof for a few weeks, yes it was off when laid, its ok when cold but when the heatings been on the cracks appear, im not sure if its the wood thats shriking or the slab thats expanding, or both, we...

hi, wonder if anyone could help, weve just put some parquet flooring down but laid it in strips, its block and beam flooring, with 50mm of screed, it has wet underfloor heating underneath, we used the dipping bitumen to bond he parquet straight onto the concrete floor, all is well til the floor...

managed to reset it, thanks for all the help from people, thanks joe

hi, sorry its got a romec sticker on not a secom,

hi, thanks for the replies, yes i understand about giving info out on a public forum, ive attached a pic of the unit to show it isnt on the wall of my local asda, ive read through the manual and it says i can do it through the engineer menus, only probably is most of the engineer catagories...

hi, i bought a glaxy g3 144 off ebay for some garages in the back garden, it works but i cant reset it to reset the engineers code, i have tried trying to reset it using the shorted pins etc that i have found on the internet, there is a secom badge on the front, just wondered if someone knew...

cheers just what i was after, its just a matter of knowing what they are called, thanks guys

We are renovating out house and are putting in block and beam floor on the first floor, its a stone building with 18" thick walls, we need to put a gap in the floor for some stairs and a gas for a cassette aircon unit in the middle of the ceiling, i was wondering can you support a beam off...