Recent content by Johan2218

Okay, thanks for clarifying and all if your advice/help.

Aah, okay. So the oil will effectively cover the white filler and caulk or whatever (with various coats to cover) ....with the stain then sealing that in? I am not at all sure I'd be able to get the pens in to the crevices and angles were spindles meet baserail and top rail.

Thanks to everyone, a lot to think about. Opps, when you say "oil based stain to colour the white filler, then apply a coloured oil such as Sadolins"....aren't an oil based stain and a coloured oil the same thing? I mean as an example Sadolin Classic Wood Protection is solvent based...and is...

So you'd prefer gloss over satinwood?

Thanks again.

Thanks. Although was hoping that I could avoid gloss paint and use something that would show the grain.

Hi, I have an old Victorian terraced house and have stripped the bannisters, post and spindles back to bare wood. It is very old wood, previously filled and painted many times, a lot of wear and some splits and holes that were previously filled with white filler, as well as small bits of old...

Interesting, thank you very much.

Seen similar issues here but nothing conclusively. My problem is that I am trying to split an existing 2 pronged wall mounted shaver socket in to two. This so to accommodate permanent things plugged in, namely a rechargeable toothbrush and shaver. Does such a thing exist? I ask as some have...

That's good to know, thanks again.

Ps. Does Evo Stick Red dry clear?

Again, great advice. Thank you.

Brilliant, thank you. Got most of that already ready...I didn't even think about contact glue. Any preferences as to make? Of course I will only need a small amount. Thanks again.

I have to put some 18mm edging on the face edge of a kitchen cabinet/carcass. This edging isn't self adhesive or iron on. The old edge will remain, so this go on top of the existing. Does anyone have any ideas how to get this properly stuck on? Thanks John

Thanks.