Hi,
open system header tank in loft and working OK ,is not dry. The noise from the pump is like a low pitch rumble tried to bleed and no air just a dribble of clear water. If I turn off the other rads yes ish the other ones start to work. There is also a motorized valve for ch and water . The...
Hi All,
I think the pump on the heating system is bust but not sure. The symptoms are the rads at the end of the line are not getting warm . 2 of the rads taken off and flushed through made no difference at all and when flushed they were not clogged at all. 2 years ago I did a full drain and...
Hi All
I have posted on here before about the heating system. Bit of background..had a motorised valve replaced about 4 weeks ago. At the time pump was found to be clogged and a fair bit of sludge in the pump. Some radiators downstairs didnt come on and some upstairs not that hot. I put 2...
Hi All
Posted before about hot water not working from the bolier...well was resolved by a new motorised valve been fitted and working ok now. When the valve was being fitted the pump was taken off and it was clogged a fair bit. The plumber got some of it out but recommended x400 to clear the...
well I had second thoughts about calling someone in...Fixed half the problem anyway..still no hot water from heating side but did fix the immersion problem..Turned out to be a wire that had come off the heating element in the top of the water tank. turned off the power and re attached and 10...
Hi Dan
Thanks for the reply..
I was thinking even if i could get hot water via the immergin heater it would be better than nothing. There is zero hot water in the pipes or tank its all stone cold. Im I right saying the immergin heater is only using the themo on the tank? and the heating...
Hi All
My first post on here hope u can help.
Heating and water system was working until yesterday. The bolier is a Baxi solo 2 and we were just using it for hot water at the moment. we have a potterton timer unit and if i switch the potterton to heat the house the boiler fires up no...