Hi All
I need to get roof replaced after storm Arwen and my roofer is telling me I cannot get the same tile as is currently on the house so will need to get a different modern tile for the affected area. Problem is the house dates back to 1700’s and has 4 different roofs all with the same tile...
So I have taken out the photocell and reset when boiler fires I shine a torch on the photocell. Looking down the photocell housing I can see a flame which starts off really strong but peaters out after a couple of seconds. It tries to fire 3 or 4 more times with same results. Any ideas?
It fires and runs for about 15 seconds flame sounds like it is weak but adjusting air makes no difference. I took the blast door off to see if chamber sooted up and you could feel the heat inside so there has been a flame but won’t stay lit.
Hi All
I have the above boiler with a sterling 50 burner which will not fire.
it seems to try to fire and sounds like it does for 10 - 15 seconds then locks out. Plenty of oil in tank.
I have replaced the photocell but still no go
Any help will be greatly appreciated... thank you
John