Recent content by JohnRam

Thanks. I'll remember that and give it a try tomorrow.

Sorry to be a nuisance lads, but I really am a novice. There's a small 1/4" slot on the side with a plastic retaining peg in it. Do you depress this to release the front cover?

Thanks for all the advice guys. Sorry I didn't get back to you yesterday, but I was called out. I don't know enough to start swapping keymats over so if you can tell me how to open the keypad, I'll buy some fluid and give it a good clean. We need the security of an alarm, so if cleaning...

When you just say "clean it up" do you mean scrape off any buildup on the board behind the keys. If so, can you tell me how to remove the cover, and whether doing this will set off the tamper alarm.

The keypad is "difficult to use" as some numbers do not always register when pressed and a couple do not register at all, one of which is the number 9 which is required to change the current user code.

Hi The keypad on my C&K Securit 700L system is beginning to get difficult to use. I've located an "Intellisense C & K 700 700l 800l Keypad" which is badged as a "Tate T-BK/8" or possibly /5. The differences in appearance are that this one has LED's 1 to 8 where mine only has 1 to 6 and also...