Johntheo5's latest activity

  • J
    Johntheo5 replied to the thread Tower ABV (ABBV1).
    OK then, the only in theory "perfect" way is to open up all the rads (TRVs etc) to give full circulation, then check what mode the pump...
    • 1763030850545.png
  • J
    They work on a pretty wide voltage range from a minimum of say 11.6V up to a maximum of nearly 15.0V depending on the charging voltage...
  • J
    I just missed having a starting handle when I started driving, (don't forget to take your Model T out of gear before using it).
  • J
    Johntheo5 replied to the thread Tower ABV (ABBV1).
    Is the Boiler you have the CDI compact combi boiler?, if so, this has a internal bypass and unless you have TRVs on all the rads I...
    • 1763016541621.png
  • J
    Johntheo5 replied to the thread Tower ABV (ABBV1).
    Yes, but a constant pressure setting shouldn't be used with a ABV as it depends on the pressure (head) increasing as the flow decreases...
  • J
    Johntheo5 replied to the thread Tower ABV (ABBV1).
    Have a look at your MIs, if you have a eCopy post it on here, your circ pump will/should have several options like the attached, you can...
    • 1762978638651.png
  • J
    Do you know if your car has this energy saving smart Alternator charging?, if so, then, its very advisable to get the battery coded/adapted.
  • J
    Possibly, one of the "best" bit of data above, is, IDE01843 Battery voltage at rest 12.4 V although how they calculate that without a...
  • J
    Johntheo5 reacted to Benny5's post in the thread How long should a 12v Car Battey last? with Like Like.
    Lots of data there. This is the one that stands out for a non-tech like me; 21/10/2025 IDE01834 Battery voltage 12.256 V (Engine Off)...
  • J
    Jan 2019 (petrol) Polo, original 59AH Type EFB Battery 21/10/2025 IDE01834 Battery voltage 12.256 V (Engine Off) IDE01836...
  • J
    I've been driving VWs for over 60 years, and the battery only had to be replaced in one, a 6V ,1963 Beetle, after 6 years, all the...
  • J
    Here is a photo of one I definitely know was in service for ~ 35 years on a Riello burner in a Firebird SE Boiler, its not mine by the way.
    • Danfoss 35 year old nozzle Parts.jpg
  • J
    Johntheo5 replied to the thread Bypass valve.
    This graph is possibly a good indication of the pressure loss. Its ~ 2.7M at 1550LPH so even at this very high flowrate the residual...
    • 1762858486754.png
  • J
    Johntheo5 reacted to jacksondb's post in the thread Ideal Logic Pump Overrun with Like Like.
    Ideal have advised "its not necessary in most cases, it's a good addition to the system so it could be worth adding it on ". So they...
  • J
    Johntheo5 replied to the thread Bypass valve.
    As above, the "normal" way of increasing the effective pump head is to install a LLH (Low Loss Header), where the boiler HEX head losses...
    • 1762847059461.png
Back
Top