Johntheo5's latest activity
-
JJohntheo5 replied to the thread Air trapped in unvented cylinder coil with X-Plan.Certanly doesn't sound right to me, PDHW is quite common. Can you confirm that the circulation through the HW coil is from top to...
-
JJohntheo5 replied to the thread Worcester vs Vaillant vs Gloworm....I know somebody (UK) that has a ~ 2 year old ecoTEC 630 which has a very, IMO, useful feature, in that it can control the circ pump...
-
JJohntheo5 replied to the thread Wireless Doorbell.Yeah, Sensitivity seems to be the name of the game, the mains one will work just outside the window/wall of the outhouse but not inside...
-
JProbably, the signal is marginal, at the distance, and the mains one is less radio sensitive/cannot be as well positioned to receive...
-
JDoes it work just outside of the house. If it does then it definitely sounds like a range issue of that one and suggests it is faulty ot...
-
JJohntheo5 replied to the thread Wireless Doorbell.Yes, thats the only reason for my post, the battery one works fine in the outhouse but the mains one does not.
-
JPosting this here even though I'm not in the UK, it might get a bigger audience! I recently installed a BYRON DBY-223548S wireless door...
-
JJohntheo5 replied to the thread Radiator 'whooshing noise'.The Drayton RT212 do have a bit of a reputation for noisy operation, how true this is, I don't know Anyhow check out your pump data. If...
-
-
JJohntheo5 replied to the thread Low pressure on shower.You could turn the shower temperature setting to maximum and the combi DHW temperature setting to minimum, say around 35C?, and see if...
-
JJohntheo5 replied to the thread Radiator 'whooshing noise'.A TRV setting of 6 and even 5 should correspond to a room temperature well over 25C so seems as if they are full open execept you have...
-
JJohntheo5 replied to the thread DANFOSS TRVs - flow rates.If you reduce the flow temperature to 70C then YOU must also reduce the flowrate "manually" (via pump speed), TRV control reduces the...
-
-
JJohntheo5 replied to the thread Baxi 105e pump noise.Thats a massive pump at 110W for a 6M pump, (45/60W would be more normal) if its running at full speed then I would expect a faif bit of...
-
JJohntheo5 replied to the thread Baxi 105e pump noise.Your old pump was noisy as well, any idea of what setting the new pump is on and make/model if available , or/and details of your old pump.
-
JJohntheo5 reacted to electrified's post in the thread Hot water demand but big delay in flame kicking in. with
Like.
Replaced whole aqua block as issue has been resolved. Does anyone know where to buy replacement flow restrictors for the mains inlet as... -
JJohntheo5 replied to the thread Boiler leak, engineer can't find.If you are not topping up the boiler regularly then well more than likely that its a condensate leak, probably from the drain pipe or...
