Recent content by Jonathan Sherratt

Need some advice as to how to wire up my new Smart Thermostat (picture 1 below) My Old Thermostat has three wires red, blue and yellow( taped red for live) and runs on 3V (see picture 2) The new Smart Thermostat needs 240V independent for 3 and 4 as it is a dry contact. Just need to know...

So the new double dimmer switch is the same triangle layout as the picture below, sadly I don't have an actual picture of it and one of the dimmers is a switch on/off as there is already a dimmer on this circuit if that makes it any clearer...

Hi there would love some advice on how to wire old 2 way double light switch to a new double dimmable light switch (one is simply on/off). The old switch is as follows: top row: A 2way = 2 x red wires A 1way = 1 black, 1 blue B comm = yellow bottom row A comm = yellow B 2way = 1...

The new switch is over at my friends at the moment, the picture is of a two gang smart switch with L2 connector missing from another switch I've fitted... they make them all like that. I was using it as an example to show that the 3 gang will have L, N, L1, L2, L3 I know that the black wires...

Here is a picture of the new switch... This is the switch for a 2 gang however it has the setup for a 3 way...

Sorry should have added this picture... you cant see the neutral wires in the first picture as they are all in one connector in the back with a blue wire connected in the other side... The other ground wire attached to the metal light switch.

Hi I've recently put 3 smart switches in my home as obviously have a neutral set up. I'm looking to put an extra 3 gang switch downstairs but the 3 switch is on a slightly more complicated loop system. Below is a picture of the wiring with labeling where the common, L1 and L2 wires go. Really...

3 witch wiring