Recent content by Jordi

Beerlover you were spot on. A couple of months ago I was determined to sort it out and found the dead leg behind washing machine. When new washing machine was installed it did not need to be connected to the hot water but the pipe work remained. Once the pipes wore drained did not get filled up...

Thank you Tony, I should have been a bit more cautions or thoughtfull - lesson leraned, this will stick with me for a long time.

Tony, thank you very much for your time & teachings. I squirted wd40 and moved it a bit in & out thinking it must have some kind of head like a nail inside so it cannot pop out. But i did with the gush of watter. Luckily I had portected the PCB thorougly and it landed within reach so I plugged...

Hi Beerlover, thank you for your insights, there was watter hammer (pipe hammer effect) in the instalation for the last several years. Now I cannot hear it because boiler makes the sequential noise (fan, gas valve etc.) but I am sure it is still there. Do you mean the DHW expansion vessel (siver...

Hi Tony, Thank you for your super speed reply. Do you mean the little pin sticking out from the flow switch (about 3mm) or the pin from the microswitch.The air gap seems correct . The pin from the flow switch is not moving on say 3-5 kg pressure. The one on microswitch is moving and clicking...

Hi, My Puma 80 makes clicking noise as if attempting to fire ie: starts sequence when I turn off cold water tap. The noise sounds just like the gas valve opening and closing. On some occasion I think it may have even fired for a brief second. It always does this it is just the length that...