Recent content by joyfull

all sorted. 3amp fuse did the job. Thank you for good advice.

I had a problem after cleaning Ariston Gas Hob. Igniter kept firing. I took out the igniter and dried it with hairdryer, Did not work first time, then tried hair dryer for longer. I tested by conecting up before reseating the igniter and this time it worked ok. Trouble was that this...

I had similar problem after cleaning Ariston Gas Hob. Igniter kept firing. I took out the igniter and dried it with hairdryer, Did not work first time, then triede hair dryer for longer. I tested by conecting up before reseating the igniter and this time it worked ok. Trouble was that...

Dishwasher kenwood KDW243A Just stopped working. When switched on Code 19 (if there is a code) shows in the window. Programme selector does not work. Only activity is if a push on/off button at the same time as holding down the timer button. panel flashes 88, then if I push the programme...

All working now. It was the thermal cut out fuse. Thanks Rocks for the help and all in the forum. Really great resource.

Great that worked ok. I looked at the heating element inside the box and seems all intact and unmarked. So maybe the fuse or the thermostat ?? or the sensor. I Do not have continuity tester. The thermal cut out fuse inside the yellow casing is all intact. Could it still be blown...

My heater on the dryer on an Indesit 126 also not working nprogramme works ok). Can't even get the top off. I have undone the two screws at the back, the three behind the powder dispenser and taken off the knobs. But top still not lifting off. Are there any more. If I do get the top off, is...