Thanks - its in my ensuite so if we dont stand and shake the head for 10mins a day it wakes us up at night - not sure where i'd even start to investigate/replace without changing the shower arm though and that would involve removing tiles/ wall panels etc. which is going to be a nightmare!
Cheers
Hi,
A bit of a strange question - I have a fixed head shower which drips.
After replacing flow valves and cartriges I realised that if I take the head off and just have the shower arm to which the head attaches then I find that the arm is holding water (due to the surface tension of the...
thanks - thinking back we had a few probs getting the temperature high enough when it was first installed which we fixed by fiddling with the max temp screw on numerous occassions .. will let u know what happens
I would agree - I dont think he did but I think I've corrected that - The manual showed me how to increase the temp and Ive moved it up to the max setting and like I say, if you run the cold water in the sink/bath whilst the showers running, it gets hotter which makes me think thats not the...
Hi,
I have a Bristan Chill Thermostatic shower valve that was installed about 3 months ago.
The shower dripped so I persuaded the bathroom installer to come back today and he replaced all the valves (Bristan provided spares) to see if the dripping would stop.
Now the shower wont get hot...