Recent content by Julia.johnston0@gmai

Sunday just tried it still nothing working Taylortwocities is this the bottom double switch?

The wires I have to put in are hallway / landing are 2red 1black yellow and blue the up stairs switch the wires are 2 red black with a red sleeve yellow and blue

This is the landing switch the single gang one these are the only wires there was.the double switch at the. Bottom hall I did remove 1 x 3 core Which was Red Black and earth

What switch do you need to see photos of

You asked for a photo of the old switch so that's what I sent

First is the landing second is the hallway and landing

Yes all worked previously except the bottom hall light the double switch in hall at bottom of stairs this had a 3 core Red ,Black And earth witch was thi old broken light outside which I removed this 3 core cable the switch was faulty as did not click so yes this is a new switch and the bottom...

Bathroom

First is bathroom second landing

If you mean the outside light then that into has been removed completely now

Nothing was done with lights when I removed the old broken light outside but ASI said the wires must have been loose in sockets as when I removed it from wall some of the wires came out I have tried to follow posts here and now ran out of options

ASI previously said when I removed the bottom light switch some of the cables came out so am unable to remember which are which. The top and bottom switches are both intermitdate switches. All I need is a pointer of where the cables go to landing switch Red is in L1, Black with Red sleeve is in...

When I removed the bottom switch the cables came out of the switch I tried to put back as I remembered but didn't work. So then I read somewhere that the cables need to be the same on upper and lower switch. But anyway I try to connect nothing seems to work

Just wanted to know where to put the wire to make the landing and bathroom light to work

It's the second one