Jupiter01's latest activity
-
JJupiter01 replied to the thread Boxing these pipes.I want to box it in, in a way that looks tidy. It measures 7.5 cm to the top of the pipe, from the wall. I thought I would need to...
-
Jhttps://www.plumbingworld.co.uk/plumbing/pipe-covers-clips
-
JCan I get some suggestions on how I should box this pipe up please? Thanks in advance.
-
-
JJupiter01 replied to the thread Basin waste.I’ve read lots of good stuff about the Thomas Dudley kit. Do you guys use that and recommend it in this situation?
-
JNo not normally prone to leaks. As I said, should be fine.
-
JJupiter01 replied to the thread Basin waste.But I’m not changing anything at the tap end. This piece will be dangling under the basin but connected to the tap as it was. Are they...
-
JThe bit you're leaving dangling. It's only using a o-ring - tap end. Should be fine, just to make you aware is all
-
JJupiter01 replied to the thread Basin waste.Sorry which area do I check for future leaks?
-
JYou can, but then if you get a leak, make sure you remember to check that area too
-
JJupiter01 replied to the thread Basin waste.Ah, I get it now. Can I leave this bit (circled in black) hanging under the sink and fit a normal push waste? Won’t need to silicone the...
-
-
JThat's not an overflow as per @terryplumb it's part of the popup waste connected to the tap. Like for like or silicone seal the small...
-
JI had an oil drum as a garden incinerator, but it quite quickly rusted away. I then got hold of a large, stainless steel washing machine...
-
JJupiter01 replied to the thread Incinerator.Oh wow. Thanks @stevie888. I can see through the hole at the top that it’s largely empty but it still has some remains of oil in the...
-
JDon't use a grinder. We had a guy killed on site many years ago (not my job thankfully) doing just this when the allegedly cleaned out...
-
JJupiter01 replied to the thread Basin waste.It’s the silver bit that needs to be replaced. But want it to connect into the existing overflow stick thing.
