Jupiter01's latest activity

  • J
    Jupiter01 posted the thread Henry hoover issue in Appliances.
    I have a Henry hoover where the red light comes on but it does not switch on. I assumed it would be a faulty switch. I disconnected the...
    • IMG_9100.jpeg
  • J
    Jupiter01 reacted to jj4091's post in the thread Outdoor tap with Thanks Thanks.
    I can't remember now but I think i either measured or took the tap to my local ironmongers. Not sure about ptfe either but it won't do...
  • J
    Jupiter01 replied to the thread Outdoor tap.
    How many wraps of this are required for the outdoor tap?
  • J
    Jupiter01 replied to the thread Outdoor tap.
    Exactly which washer did you use? Presumably the PTFE is still required as else the thread will come loose.
  • J
    Jupiter01 reacted to dilalio's post in the thread Outdoor tap with Thanks Thanks.
    https://bearing-king.co.uk/products/loctite-55-pipe-thread-sealing-cord-immediate-full-pressure-sealing-50m?variant=40921584042074&countr...
  • J
    Jupiter01 reacted to jj4091's post in the thread Outdoor tap with Thanks Thanks.
    Had to get a fibre washer for mine. PTFE wouldn't seal it
  • J
    Jupiter01 replied to the thread Outdoor tap.
    This has started dripping from the screw joint after a few months of use. Is it a case of removing the tap and existing PTFE and...
  • J
    Jupiter01 reacted to Ivor Windybottom's post in the thread Out building - shed with Thanks Thanks.
    You need insulation AND heating anywhere that involves water or a fridge. I'm currently building an outside toilet. It has insulated...
  • J
    Jupiter01 replied to the thread Out building - shed.
    Would the insulated toilet room suffice or will that be affected by the cold from the main part of the shed.
  • J
    Jupiter01 reacted to 23vc's post in the thread Out building - shed with Thanks Thanks.
    Yeah I deffo wouldn’t plasterboard an uninsulated (shed) wall, it’ll end up degrading with moisture. you could do something like ply...
  • J
    Jupiter01 replied to the thread Out building - shed.
    was going to dry line the toilet section and leave the rest as a shed and as you describe above. Perhaps, I should insulate the toilet...
  • J
    Jupiter01 reacted to 23vc's post in the thread Out building - shed with Thanks Thanks.
    Are you dry lining/plastering any of it or is it literally a wooden (ship lap type) shed with the usual air gaps all over? If the...
  • J
    Jupiter01 reacted to Collectors's post in the thread Out building - shed with Thanks Thanks.
    A tiny bit more expensive with SIP's, but a 5 times better build & a lot quicker than making it out of studwork. My vote is for Mrrusty...
  • J
    Jupiter01 replied to the thread Out building - shed.
    I did start off by saying that it was slightly odd! Adding insulation to floor, walls and ceilings is going to add considerable cost and...
  • J
    Jupiter01 replied to the thread Out building - shed.
    Can I lag the pipes?
Show older items
Back
Top