Jupiter01's latest activity

  • J
    Jupiter01 replied to the thread stud wall - 6.5m.
    So effectively, this wall will have two header plates? That's useful to know and I will adjust the height of the upright studs accordingly.
  • J
    Jupiter01 reacted to Johnpaul Manning's post in the thread stud wall - 6.5m with Thanks Thanks.
    Splitting it is exactly how most of us would do it. A 6.5m panel is a pig to lift and square on your own, so build it as two frames of...
  • J
    Jupiter01 posted the thread stud wall - 6.5m in Wood / Woodwork / Carpentry.
    The rear wall for my garden room is 6.5metres long. I am building this from 4x2 studs and lining with 11mm OSB. I fear this will be too...
  • J
    Jupiter01 replied to the thread When to lay OSB floor.
    I have now purchased a water proof membrane and planned to lay this down on the floor. It can sit there - potentially for months...
  • J
    Jupiter01 replied to the thread Garden room - build over summer.
    Could I safely do something like this: - build and stand up back and side walls - have diagonal supports for all 3 walls - if the walls...
  • J
    Jupiter01 reacted to opps's post in the thread Foam gun with Thanks Thanks.
    A gun will work out cheaper in the long run and should give you better results given that you can adjust the flow rate. The cannister...
  • J
    Jupiter01 replied to the thread Garden room - build over summer.
    Morning, I'd appreciate your thoughts with this guys. I don't want to hit an impasse, especially as there is some reasonable weather...
  • J
    Jupiter01 replied to the thread Foam gun.
    I've gone with the best seller on Amazon and will see how that goes. The trick seems to be to keep a bottle on the go and blast it once...
  • J
    Jupiter01 reacted to Wayners's post in the thread Foam gun with Thanks Thanks.
    I read 3 months sitting is ok but I blast a bit through when mood took me. I've had a few sit around for for a while just jam up solid...
  • J
    Jupiter01 reacted to aveatry's post in the thread Foam gun with Thanks Thanks.
    Its a no name cheap thing from travis perkins
  • J
    Jupiter01 replied to the thread Foam gun.
    which gun do you have?
  • J
    Jupiter01 reacted to aveatry's post in the thread Foam gun with Thanks Thanks.
    The will still work because the liquid in the gun is sealed - in theory. when you operate the gun there is a rod that is inside the tube...
  • J
    Jupiter01 reacted to endecotp's post in the thread Foam gun with Thanks Thanks.
    Well see the other threads. In my experience, "a few weeks" is OK, "a couple of years" is not.
  • J
    Jupiter01 replied to the thread Foam gun.
    so if I have a gun attached to a foam can and it sits in the shed for several months, when I then go to use it again, will it work fine...
  • J
    Jupiter01 reacted to endecotp's post in the thread Foam gun with Thanks Thanks.
    Yes, also on eBay for a similar price. See previous threads, e.g https://www.diynot.com/diy/threads/what-foam-gun.656684/
Show older items
Back
Top