Recent content by kb29r

Ok I have an engineer coming out on Monday and will let you know the issue/fix

Ideal Isar HE30 Hi all we have this boiler - im aware that this boiler ain’t the best but when I call for central heating the burner lights up for about 30/40 seconds then goes out - fan continues to run then after 2 minutes the burner kick in again but for about 40 seconds then goes out - is...

All wired and set up perfectly - thanks all for the advice (y)

Thank you for the info - will set it up hopefully over the weekend and report back(y)

I have the above wiring and also wish to connect to the exact Drayton Wiser as above - can someone please tell me where the wires go on the new Drayton

A banging noise - I have emailed Grohe and they suggest the non return valves are faulty so will replace these and let you know Ken

Anyone? :(

Hello I have the above shower and have a problem where there is a horrible noise in the pipes around the shower until hot water comes out of the shower head - then it stops The shower is powered through my central heating boiler (new Baxi combi) - before that i had a vokera with the same...

It was the PCB board

I have the above washing machine and have a problem Half way through a programme I switched it off a few times and now it will not work - it fills and drains OK but wont start. The brushes seem fine and the motor is 12 months old - any suggestions? Ken

Its a Vokera 20/80 flomatic

The banging noise only comes when you turn the tap ON and not OFF I have read that water Hammer is caused by turning the tap OFF

If its plastic clips - then I can do that myself - I just thought it may have been a bit more of a technical issue involving pipework. Incidentally, looking at water Hammer - isnt that caused when you turn the taps off and not to on as is with my case?? Thanks for your input and will have...

the water cpmes straight from the main into a combi boiler Is that all it need pipe clips - why am i being charged 92 quid for that :o

bump