Recent content by Keitai

Gonna put two bolts through the thin piece of ply and side of cupboard and two through the end bits which hold up the bar. Are the bokts two thin? I was gonna snap them off with plyers

How about pyracantha and grizilean?

How you get these rusting old bolts out? Of support concrete posts? Is drilling another hole an option with ribar inside?

Is there a certain direction you're supposed to go with hook and loop brush?

Cut it right back. How about these other hedges?

Hammer it flat?

Still haven't got that door to open yet, will take out back panel and try to access panel when I get time. Also, was broken into luckily at first I thought they went through back door as there's a gap at top where door doesnt line up and of course left side doesn't open anyway. But lster...

Actually wall separating neighbours in flat do not a stud wall, I guess baton on breeze blacks then plasterboard so I used 100mm screws. I used the 65mm duo plugs instead of shorter ones. My 6mm SDS drill is a bit bent, I guess get a new one?

Thinking these put in with bolts so stronger

Due to the sheer weight of all my clothes the pole holding my clothes has collapsed in wardrobe. Shall I buy something which I can attach with bolts to wardrobe sides underneath pole to hold it up. And also might get a metal pole as it's stronger, but dunno where. The wooden one seems to be...

But must be able to guess roughly where the stud is measuring the 16 or 22 inches (every stud) from corner?

Built 4 years ago, flat. Internal wall. Knocked it. Pretty sure friend said it was too. Aren't external and neighbour's wall all breeze blocks batoned and plasterboard and internal walls studs?

My friend has these, how do you put them up? Just fix to the stud, and how other than a stud finder do you make sure you're drilling into a stud? 16 or 22 inches apart measured from corner

Thought a sewing repair shop could attach hooks or new velcro sewed on to improve the weak velcro which cones apart when leg massager starts up. She said as it's electric she can't attach metal hooks or sew into it as it's electric and dangerous, is this true? How can I make the now weak...

I'll wrap blue roll around cistern connection ti see if that gets wet