Recent content by Kentucky

Hello. I'm looking at replacing 6 internal doors with those white 6 panel doors you see everywhere. But I am finding it difficult to find doors to fit. The current door depth is 38mm or 1.5inches but the ones I see on the internet seem to be 35mm or 40mm. Is it possible to get 38mm deep doors...

Thanks for those replies. Reason I suggested PCB was that the 50FF instruction book flow charts for fault finding on pump overrun has 'does the pump continue to run after SL is interrupted. If YES does the pump stop after several minutes. If No - Faulty PCB replace. Another thing I've noticed...

In April we noticed that the CH pump continued to run on and on after the timer went off, not for just the usual few minutes but all through the next day. Also it seemed the boiler would fire for a minute or two despite no demand for hot water from taps or the room stat. For no reason it righted...

Got a metal front door with Lockmaster lockset. On the lock side of the door there is one flat bolt towards the top and one flat bolt towards the bottom. Door has been sounding crunchy for a couple of days and tonight I couldn't get out as it appears the bottom bolt will not retract. Aside from...

Thanks for the warning about the Wilkinson product. Almost bought some today just to try. Think perhaps I might snap up the last 3 Ronseal's as you know you're getting a decent product. Mind you got a dilemma about neighbours. Not sure who owns which fence. Guy to the left painted his brown last...

The house we moved to last year ago has a pro landscaped back garden with blue fence panels. At first we weren't sure of the colour but now like it. Somehow it makes the green and colours of shrubs stand out and is different to boring old browns. It needs painting again so I started to look at...

I've been renovating a house for the last year. Unfortunately several areas of laminate have been splashed with gloss and emulsion paint. The gloss paint splashes have hardened over time and white spirit has no effect on them at all. Can anyone suggest something to remove gloss paint in...