Hi, had diverter valve changed about 6 months ago and all was fine. Heating works but now the hot water is only Luke warm. When hot water tap is running or the shower the boiler keeps switching the burner off and on it might say be on for a minute then goes off say for about 30 seconds then...
The seller that I brought it off isn't on ebay anymore so I've ordered this one below.
https://www.ebay.co.uk/itm/KKmoon-Digital-Underfloor-Heating-Thermostat-for-Electric-Heating-System-U4K1/113989118173?pageci=da15dc30-4bca-43e2-84e8-72077367fad5
Hi the underfloor heating is electric. This is the back of the thermostat, can I use it for underfloor electric heating?, thanks for your advice so far.
Hi can someone point me in the right direction on how to wire it up the instructions are useless. The first picture is how the old thermostat was wired up the second picture is taken from the instructions of the new thermostat, GB image is what I've been following. I know where the mains live...
I had the same problem with both radiators in the conservatory I changed the pipe to 15mm had to leave about 1m off 8mm pipe because it was in the wall. Works fine now.
Hi, it's an old boiler but she works well. The temperature reading on the front doesn't work the pressure does. Is it possible to just change the wire (probe) or do you have to change the complete dial. Ive fitted a new thermometer just to see what the temperature is and it works but its sitting...