Recent content by kimbarrass

sorry that shpould be both the black and the orange go through the connector box and go out the back of the machine.

blue one comes from white connector box but then goes into two wires for control pannel (double blue) orange goes throught the back of the machine

1 black, the 2 blues and the orange left

OK here goes, not very good at this so will describe as best I can. 1 Red & 1 Black go straight to ducati cylendar thing ( on image) Other Black & the Orange wires goe to white square connector box then out the rear of the machine. White wire connect to the tumble dryer vent on bottom of...

all the ones from the control panel. have 2 black, one white, 1 orange, 2 blues, 1 red left to attach

all the other wires. sorry he took them all off.

have put pink n white on 2 and grey on bottom starter switch.

belt snapped and husband didnt realise under warranty

pink/white wire goes to door latch so does shortest grey wire. orange wire goes through back of machine. heres pics if this helps! noticed when took side off that there was a brown wire with cao on it not attached but sitting loose on the little yellow bow in bottom right, theres a gap for...

Still hoping someone out there can help me, wouldnt be so bad but its not even a year old and cant use warranty as was husbands fault in the firs place!!

Sorry Its a TVM560 Hotpoint Aquarius

Sorry i have included pics as I have no black/white wire but I have an orange one. the double blue wire is very short as in picture, also I dont have 2 white wires but do have 2 blacks.

My husband replaced belt on dryer but removed the control pannel in the process. Now I am stuck as he cant remember what wires went where. PLEASE can someone help. I need to know what wires go into the start switch, then the timer, then there is the hi/lo heat switch. Any help would be...