Recent content by KnuckleShuffler

Problem Solved: For some reason the pliot light was getting blown out, thus shutting down the system. I've since cleaned the pilot nozzle and had a good clean up inside the combustion chamber and burner assembly, and now everything works fine.

The main flame & the pilot go out after about 30 seconds The pipes near the boiler & the pump are cool

Yes the pump is running, no probs there

I have replaced the thermocouple, and the pilot can now be lit, but the boiler will only fire up for about 30 seconds before shutting down completely. any ideas

Its a Baxi WM 30/3 RS. I've tried your suggestion to light the pilot with no luck. I'm now trying to disassemble to check the themocouple. The plate which covers the main chamber has 4 wingnuts on it which i've removed, but it only pulls away about an inch. What elses needs to be removed...

I have a Baxi central heating boiler approx. 18 years old, and last night while on, gave a loud clunk noise and turned off (no flame, no pilot light) I am now unable to turn the pilot light back on. Any ideas/solutions Cheers

I have had a Hotpoint RFA60P fridge freezer for around 12 months. From day one when the compressor kicks in, it is fairly noisy, and after a couple of minutes there is an audible groaning noise. The groaning stops when the compressor shuts down. The instruction manual states it may be noisy for...

I am looking to buy one of the above products. Does anyone recommend one product over the other ? Also, I've read that the easiest way to apply the liquid into the system is via the F & E tank. Am I correct in assuming you have to drain a certain amount from the system first ? If so, after...