Recent content by koalaukboy

hahaha you really put a smile on my face. just incase if it wasnt a joke. 868mhz is for the radio freq for the wireless signal from to siren and back. ;)

You can add unlimited wired door contacts to existing wireless dc via bus inside the contact and you can add aditional wireless siren 868mhz or wire it to existing internal siren on the pcb (only 2 legs) there is also tamper sw connection inside to extend it. I got ashock sensor for the garage...

Unable to find user name and password for cgi commands, linux box says cgi on port 801 run HTTrack and there are no other pages on the webserver on the device, Hopefully they will respond to various emails I sent tonight with regards to base fw. Alternative would be running a CID...

Remote config is done via cgi or xml, I now located cgi and on port 804 but trying to gain access to cgi directory as it is protected..

Logged in to installer menu via main operating panel, I used link crawler and didnt find anyother links other then simple user htm files. If you manage to get more info let us know. I sent an email requesting stock base fw from climax but I dont count on it. It is still a basic alarm only to be...

We need the stock firmware I now managed to get in to installer menu but very limited and searching to find if it is possible to get climax stock fw after that we ll have all the installation web interface and menus on the panel

can you check your fw level and post it please. CTC1200 1.0.17 I1200E31A 0x008b

http://192.168.1.2/advSetting.htm, line 9, col 1

Hi , I also have the same alarm kit and so far I got this information, You can actually login to the admin panel via UI from your browser, First find out ip address for the alarm panel from your router and click to login user #; admin pass: admin1234 this will log you in but...