Recent content by Krug

Thanks for the info. So if I couple a 2 bar ST pump with an Aqualisa thermo mixer such as the 609 or 700 what kind of flow rate would I be looking at? More than 20L per minute?

Hi, My heating system is gravity based with about 1 meter clearance between the cold tank in the loft and the shower head. Does anyone have experience with this unit? Would it give a similar performance to an instalation with a seperate shower pump. Does it really deliver 18 L per minute...

No, it was a serious post. I want to install a combi boiler and want to know if I have enough water pressure for a good hot shower from it. The boiler recommends a minimum of 1.9 bar for maximum temp rise output. Where do I get a pressure guage for a tap from? How will I know if it fits my...

Hi, I used the kitchen scales and the open ended shower hose. Opened the cold tap and pushed the hose onto the scales until the water was almost stopped. The scales read over 10 pounds, water was still spraying out of the sides. The area of the hose was approximately 0.12 square inches, so...

anyone?

Hi, I would like to install a worcester 42cdi combi boiler to replace my old gravity system. Its a 2 bed with one bathroom and 6 rads. I want a good hot shower of around 42 C plus. Since the cold water in winter can be close to zero how do I guarantee a good flow rate for the shower? If i...