Recent content by lanber

no, circular saw.

Morning gents any tips for removing burn marks on the side of my oak doors ,tried hand sanding but not having much luck.

cheers mate thankyou

Hi gents my boiler is dropping pressure i can fill it back up to 1 bar and within 3 days its down to.5 is there any other reason other than a leak for this to happen also noticed when i filled it back up water dripping from the overflow pipe from the boiler. thanks

Hi we have had the alarm for about 10-12 years no probs, i knocked the mains of yesterday and the alarm reverted to the battery as it should but the alarm sounded till i switched the mains back on, could this be an indication that the battery is us. thanks

yes they are two seperate red cables with grey sheath

all switches and fittings are class 2 just need to replace the old pull switch, not sure why i have 2 red cables on the pull switch. when the rest of the switches are red and black Thanks.

Hi gents the house was built early 60s so no earth on the lighting side, all the lights in the house just have the 2 cables going to them black and red except for the bathroom which has 2 red cables its just a normal pull switch and is not switched from anywhere else any ideas.

Hi muggles it is a sealed system

Hi gents ive been told that you can change rad valves without having to drain the system on these boilers. not quite sure about this any ideas.

cheers m8

can these be fitted to close coupled systems

Hi people im thinking i may need a new syphon taking 2 or 3 attempts before it will flush, the syphon is 11 inch not including the threads the assistant at the plumbers tells me that the size is not an issue, not quite sure this is correct. The system is close coupled any advice thanks.

Hi we had a log burner fitted about 12 months ago, and a chamber was created using fireboards which we painted with normal white emulsion, this has now blistered on both sides. All the heat proof paint seems to be in aerosol form,which we dont really want as the gap between the boards and the...

Hi folks ive just replaced my router and now my printer does not work i am assuming one is not reading the other, my internet is fine im on windows 7 and everything is wi fi no cables. what needs changing and where will i find it. many thanks . steve