Recent content by LaurenceG

  1. L

    Potterton Flamingo 20-30 CH not working but getting hot wate

    Yeah that's what I was thinking, why we got a new one. Really so it's better to turn on HW before you turn off the CH? (then turn both off)
  2. L

    Potterton Flamingo 20-30 CH not working but getting hot wate

    Hey Mandate, thanks ever so much for your posts! We bleeded the whole system, from the bottom two rads and it still didn't work, which I thought but my dad seemed to think that it would. Turns out the green/yellow cable was a switchable live... not earth, wired up different in the room...
  3. L

    Potterton Flamingo 20-30 CH not working but getting hot wate

    Thanks ever, ever so much for your post! It's helped us both greatly! Right my dad has checked all the wires, and he gets a signal on all at the right time other than the white wire, which doesn't get anything any time - While I made sure the heating was on, on the programmable switch...
  4. L

    Potterton Flamingo 20-30 CH not working but getting hot wate

    Got ya, there is power at the stat. The powerhead is working, my dad says he tripple checked the wiring. A heating man might just cost the same, but you would need to add at least one of the parts on top... He phoned a plumber and they said to drain the system from the lowest rad...
  5. L

    Potterton Flamingo 20-30 CH not working but getting hot wate

    Well I should have but no harm replacing them anyhow. Makes sure I guess. I read that on some forums, to link them together. What's the switch do anyway complete the circuit? No, sorry we can't do that. Little low on money currently after some car problems.. Thanks for the reply!
  6. L

    Potterton Flamingo 20-30 CH not working but getting hot wate

    Hello there guys, seems you know loads about CH problems! Please help me with a problem my family has been having, me and my dad have been trying for a while to fix it... Basicly one day we found the heating wasn't working, not firing in the boiler, but the hot water was working fine...
Back
Top