Recent content by Lawro

I will try another (3rd socket) and see if that resolves the issue. Suspect that was the issue, but after trying it, it didn't work.

I currently have a twin and earth connected to a terminal block and the circuit is working with no issues. However, when I connect the cables to a electric socket, the RCD trips. Any ideas what could be the root cause?

Can I ask what Fluidmaster part you used? I need to replace my ideal standard parts too

Thanks, it continues to run, but also the cistern is not filling up now, it is just running into the cistern, but as per my other comment, I would ideally replace the whole thing as it seems to keep failing

This is the third time I have had someone in to replace a washer / part, I want a new one as this one is not reliable

Is there an easy way to identify what replacement part? I have searched and can't find it. I can't see anything to identify the part when I look at the item

Hi, I am trying to identify the replacement cistern parts for an ideal standard toilet, but no joy. Can anyone suggest the best way of finding out what the correct parts to buy are? Thanks

I fitted originally with 4 screws, but became loose quite quickly unfortunately. Ironically, the old dishwasher was a Howdens model with something similar and had a different fitting type and it was rock solid

I have bought a Beko dishwasher. The door kit is very simple to fit, but it is not very robust (essentially just 4 screws) and one of the screws is where the door hinge was, which I have filled with wood glue and sawdust. Does anyone know where I can buy a fitting kit that will go into the 4 big...

The more rusty one is at the bottom, the less rusty one is on top

I have taken out an integrated fridge freezer, replaced the larder cupboard and put the fridgefreezer back in and now the fridge door is slightly tight against the cupboard, can anyone suggest how best to adjust? See picture attached

Thanks, That is definitely the item that I have. Looking at the diagram, I held down the "button" and then used a screwdriver to dislodge it and now it is out - thank you very much!

I have the pictured ideal standard shower knob and need to remove as I have got a leak. There is no obvious way to remove, has anyone come across this previously and knows how to remove? I "think" it might be to lever the front face plate, but don't want to risk damage if I am wrong

The water from the shower is leaking and I would like to remove the shower mixer to see if that is where the leak is coming from. However, its not clear how to remove the unit, does anyone know how I can remove? I think its an ideal standard tap.