Recent content by Lea27

  1. L

    Pyronix Enforcer V10 kit 5

    Sorted! Thank you so much! You are a star!
  2. L

    Pyronix Enforcer V10 kit 5

    I performed a clean start and have it working now. Input 1 front door, 07 final exit, A B, any, one chime, not omittable. There is no error code now and the diagnostics say excellent signal strength and good battery. I set the alarm (still using default manager code), went out door and it set...
  3. L

    Pyronix Enforcer V10 kit 5

    I went to Change inputs...pressed yes...it says input 01 Front door. I then went to input 07 and it just says input 07 so it is available. Should I have input 01 set to final exit instead? Just tried this and it still says wireless mismatch input 07. Thanks again
  4. L

    Pyronix Enforcer V10 kit 5

    Thank you so much for trying to help. We have only learned for input 01 as we were testing it before learning any other devices. I’ve checked and input 07 is still available to use. Sorry if I’ve misunderstood. I was going to try to put the front door sensor as number 10 FX part ER and use a day...
  5. L

    Please help- we are setting up enforcer v10 in a bungalow with one door. We do not need...

    Please help- we are setting up enforcer v10 in a bungalow with one door. We do not need different zones as day/night settings the same- all alarms set. We ‘learned’ door sensor but there was message ‘mismatch 07’. What should the settings be for only entrance exit. control panel is at front...
  6. L

    Pyronix Enforcer V10 kit 5

    Please help...we are trying to install and set up the enforcer v10. We have a bungalow with one entrance/exit door which we are trying to add the sensor to. We also have the external bell which needs to be connected/learned. Then we have 4 vibration window sensors. We have only attached the door...
Back
Top