Recent content by LFB1975

Thanks for this. I'm now looking at going down the building regs thing with the builder. I have also spoken to NHBC and they will take up my case if I get no joy with Bovis. I'm now waiting for Bovis to get back to me after they visited me but the best response I've had so far is "the...

The controller is located next to the boiler in the downstairs cloakroom. The house was built in 2011 but I have no idea what the sq meterage is. Looking at it I think my best bet would be to replace the controller to a wireless system. I know Danfoss do a wireless system so hopefully I...

The TS2 sensorIi beleve has been put in the wrong place as I live in a new build 3 story town house and the sensor was put in the first floor lounge which is approx 4X6M and behind a door. The lounge gets too hot when both of us are in the room with the telly ETC on so the heating knocks off...

I have a Potterton promax sl boiler, Danfoss 7 day controller with a danfoss TS2 thermostat in the lounge. The hotwater cylinder is a megaflow system. So if there is a way of changing the thermostat to a RF receiver would be easier. Thanks

Hello My CH thermostat is in the wrong place so to save me ripping the house appart to move it is there any way to change the thermostat to a wireless one so i can put the tempature sensor somewhere else. Thanks

The radiator size is ok because when the heating comes on they get very hot and the rooms warm up. But after the sitting room has warmed up and we are in it, the thermostat thinks that the rest of the house is warm so doesn't turn the heating back on.

The radiators are the correct size. Most of the trv's are set to full as the heating isn't on long enough sometimes to warm the rest of the rooms up.

I've bought a brand new three story townhouse and I am wondering if the heating thermostat has been put in the correct place. The builder has put it in the first floor sitting room internal wall behind a door. I have two radiators on the outside wall without TRV's. The rest of the house has...