Recent content by Liamb023

Hi yes i think it will fit the way you have shown in the picture, as long as you are able to drain the water out and solder the fittings on it should be no problem, some filters the taps are inline in 1 straight length but with the magnaclean (as in the picture) both taps can be turned to suite...

Hi we fit a lot of magnacleans and fernox TF1 filters to heating systems, i would say the magnaclean should fit if you are able to solder a couple of fittings on as the valves on the magnaclean can be turned up/down ect so will fit in a shorter space. As for the other filters i cannot say how...

This sounds like your cold water mains pressure is too high, try turning your stop tap down slightly or fitting a pressure reducing valve to the cold feed to the boiler. If it is too high what happens when you turn off the cold tap the water the back pressure down the pipe causes the water to...