Recent content by livegame

:?: :? :( :( :?:

Update on problem, The boiler shut down and would not restart, I increased the pressure in the vessel to 0.9 and the other pressure gauge to 1.5, I also changed the c/h sensor (on the c/h flow pipe) The pressure has not altered over the last couple of hours (although I have not...

Sorry for not being clear about the pressure, It does not go above 1.7, Although it does seem to shut off anywhere between 1.5 and 1.7 I have been reading other post as well as the installation and servicing manual, I have got confused about what the pressure settings should be, The...

I did check and recharged the expansion vessel before and after I replaced the PRV, I set the pressure in the vessel at 0.5, the boiler is now only running for about 20 minutes before shutting off, the pressure seems to be staying just above 1bar (with no loss) Thanks

Thanks for the advice Tony, Just to let you know, I was wrong about changing the PRV not making a difference, The pressure is now staying around 1 bar (not dropping back to 0) What is happening now is, once I get the boiler to stay on (following the procedure I explained before) It shuts...

Hi, Hope someone can help, I have a worcester 28i rsh combi boiler, about 5 years old, Got up one morning about 2 weeks ago, had no c/h, the pressure gauge was at 0, let in water and bought up to 1bar, (done this a few times over the past 4 years) This time nothing happened, turned off the...