LuLuKD's latest activity
-
LLuLuKD reacted to CountryFan's post in the thread Vibrating/ droning sound since new hot water cylinder was installed. with
Thanks.
Check the Honeywell 2 port is the correct orientation -
LLuLuKD replied to the thread Vibrating/ droning sound since new hot water cylinder was installed..You can just see the arrow in this photo
-
-
LLuLuKD reacted to Johntheo5's post in the thread Vibrating/ droning sound since new hot water cylinder was installed. with Thanks.
Apoligies, yes, correct, the second photo seems installed correctly.
-
LLuLuKD replied to the thread Vibrating/ droning sound since new hot water cylinder was installed..No new pump has been fitted. There is an expansion tank also above…I’ve built shelves around it, (it’s just out of shot)
-
-
LLuLuKD reacted to Mister Banks's post in the thread Vibrating/ droning sound since new hot water cylinder was installed. with Thanks.
You need an auto bypass valve. It’s standard practice on s-plan so goodness knows why the cylinder installation didn’t include one.
-
LLuLuKD reacted to Johntheo5's post in the thread Vibrating/ droning sound since new hot water cylinder was installed. with Thanks.
The next time it's heating up and noisy, just drain off say around 2 or 3 litres of HW and see if the noise dies down. Can you post a...
-
LLuLuKD reacted to CountryFan's post in the thread Vibrating/ droning sound since new hot water cylinder was installed. with Thanks.
Has a pump been fitted with the new cylinder?
-
LLuLuKD posted the thread Vibrating/ droning sound since new hot water cylinder was installed. in Plumbing and Central Heating.Title: S-Plan system severe vibration/drone on HW circuit only after new cylinder install Post Body: Hi everyone, Hoping to get some...
