Recent content by macnic0

We have put one on full blast and will see if it makes a difference. Will post back in a day or 2 with any results. thanks again. :)

Thanks that's really useful. Is the only way to solve that to have another TRV removed to leave at least another rad on full flow - or would leaving one or more TRV on full flow (top number) maybe alleviate the problem?

Thanks guys. The TRVs are on the radiators the opposite end to the bleed plugs. I was reading about the balancing and just tonight the radiators furthest away from the tank are not as hot. I will have to invest in a radiator thermometer or try and get the guys who fitted it to come back...

We didnt have the problems before the valves were fitted no. Whan we complained to the fitters they helpfully said "yeah you sometimes get problems with microbore systems like yours". :roll: The living room radiator didnt have one fitted as the the main thermostat is in that room. thanks.

We are having a lot of problems with our CH system. Over the summer we had TRVs fitted (8mm pipes) and a full system flush. We have an Apollo Fanfare wall mounted gas boiler and a pumped system. Since we had the TRVs fitted we have had two problems 1. air in the rads, every 1-2 hours we...