Recent content by macrofeet

if i had 4 32 port hubs/switches i could patch 100 cables in no worrys, just the same as 1 hub/switch Plug a patch cable into a free port and it should work. nice pics tho

Thanks for all of the advice from everyone i will take it under consideration

building pc is easy ? but i "must" it is the only way pay 300 quid now, get an electrician to wire in a CU, well i can tell you that you can die from building a pc and i have seen people be electrocuted and go to hospital. Ethernet cable = 2.2v to 3.15v and it is just as easy to install...

i cant replace the CU with out opening the meter as the only way to isolate the cu which does not involve opening the meter and removing the fuse is unsafe ?

sorry i should have said "after the 3core 6mm2 has been replaced" i have not yet replaced the est 6mm2, 3 core cable as i would need the power off from the meter first so far i've only installed a stand alone rcd shower side of the fuse and replaced the shower unit this was a long time ago...

After replacing the wiring from the shower to the rcd i'd now like to replace the shower CU to 40amp fitting this is not a problem looks like a simple job however As i cant really afford someone to come fix it for me and i'd like to do it my self if i am able 1/ i'm on an electric...

Hi, Currently replacing a Gainsborough 2000x which would be a 9.5kw(39.9amp) which was installed before i moved in prob when the house was built and worked fine for a few years after i moved in it was setup in the following way Separate fusebox(CU) from lights and power (1990's mem)...