Thanks for your reply.
I have not yet brought a new PCB for my unit so as it's the weekend I tought I would have a look at the PCB and the relay.
I have removed the relay from the PCB, and when 12volts is connected to the relay it clicks, and you get a zero ohm (short) reading on my...
Thanks for your reply.
I am sure that the control board is at fault as today I switched the unit on and the drain pump kicked in without any mode being selected.
You can then select a mode and press start it then starts the program and lets the water in but the drain pump is still...
Thanks for your reply.
It looks like a problem with the control board.
Where is the best place in the UK for me to buy a new control board?
Thanks for your time.
Best Regards.
Good Day All.
I have a Indesit IDL530 Dishwasher, it has given me no problems upto now.
We only use program 4 (Rapid 25).
When we start the unit it drains, fills and washes or so it seems.
Just befor the end of the cycle it drains all the water and rapidly flashes the 4th light...
We have a total of 7 rads.
Bathroom (60x60cm).
Kitchen (70x60cm).
Front Room (200x30cm).
Landing (50x60cm).
Bed Room 1 (80x60cm).
Bed Room 2 (70x60cm).
Bed Room 3 (60x60cm).
Best Regards.
Good Day All.
We have a Worcester 28CDi boiler, We don't seem to be having any problems with the hot water, but the Central Heating does not seem to be working well.
To be able to get any kind of usefull heat into the rads we have to turn the heat on the boiler to max, even this is not...