Recent content by Mariano

  1. M

    Little reservoir next to condensation outlet / Vaillant Boiler

    Hi Guys what is this little reservoir next to the condensation outlet on my vaillant boiler? looks pretty browinsh i wonder if it needs a clean? Can it be removed easily? Dont wanna mess around too much ideally... I found out investigating a leak due to a frozen condensation pipe. Have...
  2. M

    Little reservoir next to condensation outlet / Vaillant Boiler

    Hi Guys what is this little reservoir next to the condensation outlet on my vaillant boiler? looks pretty browinsh i wonder if it needs a clean? Can it be removed easily? Dont wanna mess around too much ideally... I found out investigating a leak due to a frozen condensation pipe. Have...
  3. M

    Toilet extractor fan recommendations

    Hi! fan has only 2 terminals, 12V and 0V, that need to be always live. There is no 3rd pin to take input from light switch, at least on this model (xpelair lv100hts), hence asking if anybody knows a humidistat one with 3 terminals so can hook up a light switch
  4. M

    Toilet extractor fan recommendations

    yep humidity control switches on the fan when humidity goes above a certain level, and then runs for as long as what the timer is set to. What I am missing is being able to switch on as soon as light switch goes on (on top of the above scenario). So what happens is light switch goes on, tenant...
  5. M

    Toilet extractor fan recommendations

    Hi Guys I am struggling to find a toilet extractor fan that meets the following: - Good quality -100mm wide (easy) - low voltage 12V - kicks off when light switch is turned on - has an override timer - has humidity sensor so it can also kick off on its own when room humidity is greater than X%...
  6. M

    Vaillant boiler status with honeywell controls

    Indeed the inbuilt display is pretty basic and boiler is in loft which is hard to access. Yes the idea is to hook up the evo to the RT and the vr350 to the ebus but not sure the system wilk get its knickers in a twist.
  7. M

    Vaillant boiler status with honeywell controls

    Hi guys I am replacing the vr350 control to my ecotec plus 630 with a honeywell evohome system as i need more zones etc. However i will loose access to boiler technical data i guess like fault codes , sys pressure, flow temp etc. Can i leave the vr350 hooked up to eBus purely for this...
  8. M

    Vaillant ecotec multizone vsmart

    hi Guys. Installed ufh in ground floor so now i would like to have 2 control zones , one for rads and one for ufh. Ideally withh internet connectivity I have vaillant ecotec 830, and was looking at their vsmart control. Do you know if i can buy 2 vsmarts and hook into the vr66 to control...
Back
Top