Recent content by martinr007

Ok fingers crossed, although I would swear it has always been set at 50 deg on the valve. Cheers, Martin

Photo of the manifold

Sorry to bump this thread but, over the weekend my underfloor heating stopped working again. I thought it was because it was 12 deg and sunny during the day so never felt it, however it was 2deg outside last night and this morning the tiles were freezing. As earlier, the manifold flow and...

I don't think so but have attached a picture of the manifold. After writing my earlier post I decided to switch every thing off, switched off power to the pump, turned down all the thermostats and opened and closed the group flow valves and closed then re-opened the boiler return valve...

Hi, Hoping someone can give some guidance as I'm at a loss. I have a fairly new house (3yrs old) that has underfloor hearing downstairs and radiators upstairs. The system was provided by Invisible Heating Systems and installed by the builder, unfortunately Invisible Heating stopped...

Thanks for the reply. I'm going to send them a copy of the Marley file and will push harder for them to come and fix them properly. Hopefully this will do the trick, failing that I'll get the solicitor involved and hopefully get a result. Thanks again for the Marley file. Cheers, Martin

No they haven't. I said I would do it if there was only the one and it was easily accessible but,because of the way they interlock I think they all need to be removed!!

Hi, Sorry if the subjects a bit of a mouthfull, I'm not sure if they have a short name? Anyway, after recent high winds some of these units have blown off. I've spoken to the builder (the house is only 1.5 yrs old) and said that I'm not happy at the way they've been fitted as they've been...