Recent content by Martman

On the estate different methods have been used, cables are run from the outside in cupboard consumer unit up the wall into the roof space one property has steel conduit next door to that they have metal box trunking and a separate PVC run. The run is about 3M on an outside wall straight up...

Can anyone tell me the current regulations regarding the running of 1mm and 1.5mm and a separate earth on an external wall. Can I use PVC glued at the joints? Should I use inspection bends or angle box’s or use a bending spring to bend the PVC? How many cables can go in a 25 mm Conduit...

Hi I have had to put my single oven next to fthe fridge freezer. Can any one tell me if there would be any point in lining the oven cabinet with 1.2 mm aluminum sheet just one side? MartMan

The cabinet is 570 I have made a channel by removing the thick mortar/ plaster down to the brick. From the pipe to the front of the cabinet the measurement is 540mm.

I've looked at berko bc50f the manual shows 550 min on the cabinet but the unit is 535 http://www.beko.co.uk/manuals/BC50F.pdf

With 40mm waste I have 540mm[/list]

Sorry muggles spell check changed it to a juggles

Thanks juggles I thought that some one would say that looks like I will have to find a shallow F/F. Any one know of one (50/50 integrated) Martman

I have a problem with installing an integrated fridge freezer, there is a waste pipe across the back which is currently 40mm. Running in a new one at floor level is not an option. I could run 40mm up to the wash Machine apron 3M then down to 32mm for 1.2M then back up to 40mm. Any advice...

Can someone please advise me on the use of these junction boxes, and do I need to be able to pull them down through the ceiling, can I not fix them and have the cable long enough to connect to the fire rated unit? I have 5 mains down lights with 11 watt bulbs, I intend to daisy chain 5...