Recent content by Martyn4526

I have a CANNON C60DFCF double oven cooker which is the same as a Hotpoint C60DPCF. I need to change the lower heater element in the top oven but I am unsure about the correct procedure for removing the top oven from the cooker. Does anyone know of any instructions or videos that might help me.

Sorry for the late response. Thank you Ian.

i need to turn off the mains water supply to a Worcester Bosch 24CDi boiler while I work on the mains pipework. When I turn the supply back on, will the boiler air-vent automatically vent any trapped air. Will I need to open the air-vent manually. Thank you

Hi Armo74. The actuator moves OK when the power is switched on and off. I have removed the actuator and the spindle is free. As it only happens occasionally I suspect that the ball is not seating properly, that's why I will be fitting a replacement. Ive worked on that valve before in the past...

Hi narkeybee thanks for your response. Mine is a 'Y' plan system with:- Glow worm Micron Boiler 50FF Honeywell T6060 room thermostat Danfoss 4033 time programmer Honeywell 4073a distribution valve I am having the occasional problem with the 4073a valve which keeps the radiators hot all the...

Over the past two weeks my central heating has developed an intermittent fault. For no apparent reason the heating cycle stops even though all the requirements to provide heat are satisfied i.e. power from room thermostat OK, timer in it’s timed ON cycle and all terminals from the timer...