Recent content by matt1098

  1. M

    Floor filler for wooden floor that will not fall out?

    Hi All, I hope someone can help So I laid some reclaimed oak t&g strip flooring 4-5 years ago and having sanded it, filled the numerous cracks with Lecol 7500 made up with 120G wood-dust. I then used Osmo polyx oil to finish the floor. Unfortunately over time most of the Lecol filler has come...
  2. M

    swapping over a in loop rose to a light fitting

    How pathetic. Grow up and find some kind of professional fulfilment in life that means you no longer find it necessary to sit at a keyboard each evening wearing a Asda bought police uniform
  3. M

    swapping over a in loop rose to a light fitting

    Well thanks again to the guys who assisted. Much appreciated Ban- all-sheds- you clearly wasted your own time if nothing else.
  4. M

    swapping over a in loop rose to a light fitting

    Thanks v much guys
  5. M

    swapping over a in loop rose to a light fitting

    Thanks very much for that. Do the reds into the spare block need to go into the same end of the block or can I put one in each end if u see what I mean? Thanks
  6. M

    swapping over a in loop rose to a light fitting

    Hi I hope someone can assist with this lame question. I have what I think is called a ceiling in loop rose (I have two cabe feeds which has two red wires going to the block marked "loop", one black which I think is called the switch wire going to the live block (I say the live block as the...
  7. M

    floor levelled preparquet but is method used doomed to fail?

    The floor is about 15-20 years old. Im not sure about the depth over the base- maybe 30-40mm deep. There is a DPM
  8. M

    floor levelled preparquet but is method used doomed to fail?

    I would be grateful for any comments/assistance re whether a well intentioned builder has levelled a floor in such a way as to ultimately doom me to failure re the plan to lay a parquet oak block floor. One part of my house is concrete screeded but is approx 30mm lower than the main house's...
  9. M

    recommended parquet fitter/layer in south east (Watford)?

    TT- Ive just tried to send you a message. Not sure if its worked as never done it before. Couldn't see an obvious PM facility so have done it via your profile
  10. M

    recommended parquet fitter/layer in south east (Watford)?

    I hope this question is not against the rules but would really like any recommendations for anyone who any forum members knows and can positively recommend for block parquet floor laying that would cover the south east (we live in Watford). I have 55sq metres (over 3/4 rooms) that I would like...
  11. M

    help-glass roof advice-cold? expensive? do-able?

    Thanks very much in advance guys as the decision I need to make will probably be the most significant my wife and I will ever make re our 3 bed semi. We currently have a single storey lean to extension attached to the side of the house. It measures 2 metres by 20 metres. Its currently our...
  12. M

    How much can I chop down an old front door to make it fit?

    Thanks Masona- had a look at your album- love the stained glass you have done. I havent the time and also dont have anything other than the front door that I could do so I suspect after the tools, materials lessons and time investment it wouldnt be worthwhile- but I love seeing what can be done
  13. M

    How much can I chop down an old front door to make it fit?

    Thanks for the replies guys- I agree the price is steep (ive made a lower offer). You do see doors make little money but normally the glazing is ugly or nothing special. Decent period stained glass panels cost £750 plus to have comissioned so it may be marginal
Back
Top