update - having checked the real state of the existing floor in terms of level, there is a definite 'hump' under the section where the door opens, i.e. you can sit a level over this section and rock it an all directions around this part. Not by much, but looks to be enough to cause the issues...
Hi all,
Hope some one can help/shed some light for me...
Background:
Hallway area 70s build house. Concrete floor with screed top later c. 40-50mm thick. Was tiled. Had new UPVC front door fitted with original floor in place, used to open and clear floor fine, although there was no...
Thanks! Sounds like I've less to worry about than I thought. Take it that water proofing duty around the vent will be down to the use of some suitable external sealer/mastic/silicon?
Need to run ducting for a new extractor chimney hood (Neff). Kitchen is galley, house is 70s terrace (mid) and neither wall in kitchen backs onto an external wall. Joists run wrong way to run ducting to external wall, so I plan to use the flat 125mm section duct and box it in at ceiling height...
Hi all,
Hope someone can help advise me on this - did do as much searching as I could on similar issues, but everything seems to be related to seal problems rather than the supply mechanism specifically.
Background: I acquired a Twyfords Indulgence toilet to replace a Gala item that had...