Recent content by Matti

Yes I have and same results

You are right, it can’t starts air locking if it worked before. But how would you explain it, no obstruction as I borrowed a k45 machine and put the snake through until it appeared in the stack so the pipe is 100% clear. I think it could be the one shot I put and it damaged the pipe or it...

Thanks guys for your comments, I didn’t use one shot and other chemicals in the same time , I followed every precaution. the problem I have is slow drain and once you pump it up with pump plunger it bubbles and then drains very nicely. Once the water turned off and then on again after few...

Replaced it even though the old one wasn’t faulty

I managed to put drain snake through and no blockage , also used one shot and drain descaler twice and used vacuum as well, the pipe is clear 100% and that’s what makes me think there is air block

Hi everyone, I am having a problem with my wet room drain, it’s air locking. If you pump it few times, the water drains, leave it few minutes and turn the water on again and it stops draining. I was advised it is air lock and it needs an AAV valve, the problem is it’s a wet room with linear...