Recent content by MattRoz

  1. M

    Upstairs radiator not bleeding

    Thanks all! That’s really helpful :) just so I know - any ideas for a ballpark figure of what it’ll cost to fix? Just a very rough idea is handy :)
  2. M

    Upstairs radiator not bleeding

    Actually just noticed another upstairs room has started to do the same thing. Opens, let’s air out, then the air sound stops but no water.
  3. M

    Upstairs radiator not bleeding

    When I’m bleeding the radiator does it make a difference if the heating is on or off?
  4. M

    Upstairs radiator not bleeding

    Hi John, the other rads are further away from the boiler if that’s what you mean?
  5. M

    Upstairs radiator not bleeding

    Hi JohnD when I bleed all the other radiators air then water comes out.
  6. M

    Upstairs radiator not bleeding

    Footprints the small tank is over half way full and when you push the ball valve down it starts filling more. Gordongas I wouldn’t have thought it was blocked as sometimes if I leave it for a couple of weeks you do get a tiny amount of air. But not enough to make water come out, just a bit. And...
  7. M

    Upstairs radiator not bleeding

    Hey Gasguru - no, there's now water that comes out at all. You can open the radiator valve all the way and nothing - no air, no water. If I have an open vented boiler - why would there be no water pushing the air out when the radiator valve is open?
  8. M

    Upstairs radiator not bleeding

    Hi there, this doesn't appear to be my boiler - under mine I have a single plastic white tube at the rear right of the boiler, and a single metal tube in the centre. Neither seem to have any taps on them. In the loft we have two tanks, one is large, one is smaller but neither seem to have a...
  9. M

    Upstairs radiator not bleeding

    Hi there, I've got a tricky problem so hoping someone out there might be able to help me. At the moment our upstairs radiator closest to the boiler isn't heating up properly at the top. I tried bleeding the radiator thinking it was trapped air, but when I open the valve fully, no air comes...
Back
Top