Recent content by mav567567

On forums such as this. No evidence to back it up.

Picture of cable. It looks thick but i know nothing.

Not sure on cable size as unable to pull stove out to check and its the only place its exposed. See consumer unit attached

Yep ive since read the same. Depends where you look at the info.

2 x Neff B64CS71GOB 1 x AEG IAE84411FB

From what im rrading this seems to be a bone of contention amoungst electricians even though the regs seem to support it. For i just want to be sure that if i turn on teo ovens at 200c and have two maybe 3 things on the go on the hob at the same time it wont trip. This for me would be worst...

Ovens are 16amp 3.8kw and need to be hardwired. Applying diversity i was coming up with a figure just shy of 29 amps as there is no additional socket. Ive read that diversity should not be applied to induction hobs but again there is alot of opinion out there on this. Bottom line, should we be...

This is what ive come across. But why would an electrician not know about diversity.

I am looking to replace a freestanding stove with 2 x 16amp single ovens and an inductions hob at 32amp. Ovens are 3.8kw and hob is 7.35kw. Currently there is a feed going to the stove thats on a 32amp fuse. Is this sufficient. Putting in another cable doesnt seem to be an option due to...