Recent content by maypole

I'm sorry if you got confused. "THERE IS NO 13AMP PLUG"

Thank you for all your help I will have to go over to my Daughts and have a look For myself. Sorry If you fell I have wasted you time?? I have neaver said it was connected to a 13Amp socket.

It Is not connected to a 13Amp socket it is via dual pole 20Amp switch on its own circuit back to the main board protected by a 16Amp MCB? It Is the cabal from the 20Amp switch Thit is going a bit Black Do you think It could be the 20amp socket that is at fault. Sorry about the picture but...

I don't have any fitting instructions for the immersion element Iv'e never seen any It is not pluged in to a 13 amp socket.

The cabal from the 13 amp socket to the mains has started to go black. I can't send photo as it my daughter house. My son in law wants me to buy a new element. Is there any need for this ???

The flex that I changed is 2.5 heat resisent but now it's the cabal the other side of the switch. If I change the switch would I still need to change the element

Hi first timer hear.loking for help.Some years ago I changed an Immersion element. 27Inch. since then the cabel has been melting . first time I changed the flex to 2.5 This has lasted for about 9 mounth now it is starting to go black on the cable the other side of the switch. Could it be the...